b2b components distribution
LED Products for PC - Boards
Light Pipe / Light Pipe Systems / Light Pipe Combinations

Light Pipe Combinations PZL 30 = The light pipe is especially suitable for fitting on multiple pin strips . A direct contact to the LED is avoided. At the front , each light pipe is ball - shaped to ensure an easier mounting on the front.
The front panel is frosted on the surface which improves the on-/off contrast even in case of effects from sun or other light sources on the light pipe. To ensure a fix position on the multiple pin strip, the light pipe must have at least three pins.
Light Pipe PGN / PGZ PRI = for moulding into the front panel. Round top (PGN) or flat top (PGZ). Recommended mounting bore 2,6 -0,05 mm. Series PRI with 2- to 12- fold array light pipe, pitch 2,54 mm, for SMD LED application. Active LED heard area 5 x 2 mm per element.
Light pipe PGN 25 Available standoff heights (x), 1,8 - 40,0 mm
Light pipe PGZ 25 Available standoff heights (x), 3,8 - 40,0 mm
Light pipe PRI 205 Available standoff heights (x), 7,0 - 15,0 mm
Top Pfeil nach oben
Light Pipe PZI 30 / PTI 30 = Light Pipe System 1- to 10- fold array light pipe, pitch 5.08 mm. The head is slightly rounded to achieve an enhanced light reflection and an improved visibility. Light pipe systems PTI 30 for direct mounting on printed circuit board in connection with SMD-LEDs.
Light Pipe System DPAH 3 = light pipe array for 3 mm LEDs 1- to 4-, pitch 5.08 mm. The head is slightly rounded to achieve an enhanced light reflection and an improved visibility.
Light pipe system PZI 30 Available standoff heights (x) von 9,3 mm bis 42,5 mm
Light pipe system PTI 30 Available standoff heights (x) von 9,3 mm bis 42,5 mm
Light Pipe Systems DUPH 2 = Single or multiple LED array, pitch 5.08 mm, with integrated 3 mm LEDs, for flexible light pipe with head 2 mm. The light pipe is fixed to the front panel by a mountig clip.
Light pipe systems DPAH 31 / 32 / 33 / 34
Available standoff heights
(x) von 25,0 mm bis 68,0 mm
Light Pipe System DUPH 3 =Single or multiple LED array with pitch 5,08 mm and integrated 3 mm LEDs for light pipes head 3 mm. The head is slightly rouned to achieve an enhanced light reflection and an improved visibility. The light pipe is fixed to the front panel by a mounting clip.
Light pipe systems DUPH 3
Available standoff heights (x) von 16,8 mm bis 50,0 mm mit light pipeTyp PZI 30
Home  |  Products  |  Service  |  Resistors  |  Linecard  |  Contact   |  German  | Top

 © 2012 Dirk Brose Elektronische Bauelemente e.K. •